Techniques for House Restumping
If your home requires a revamp, but you don’t want to go through the hassle and expense of having it renovated, then restumping may be your answer. Restumping involves replacing the rotten timber posts that hold up the structure of your house. It can extend the life of your home by saving you from more expensive renovations down the track.
1) Removal of the old concrete.
This not only involves the breaking up of the concrete but also involves removing any stones or rubble which may be left underneath it. Once this has been done, the house must be prepared to accept new concrete (this includes putting in temporary supports around your home to ensure that it remains stable during this time).
The concrete then needs to be poured into each hole and smoothed off before finally allowing it to set. A slab roller can prove very useful here as well; however, if you don’t have access to one you can always use a shovel or broom instead.
2) Make sure you’re on solid ground
If there are areas where water collects or any other signs that there may be damage underneath, get an engineer out to assess the situation first. Some houses aren’t able to have their stumps replaced due to complications with concrete footings or a lack of them in some places. You’ll also need an engineer for council approval.
3) Get the right tools for the job
When restumping your house, make sure you have all the necessary equipment to get the job done. You’ll need ropes or scaffolding support to lower yourself safely down into position. Chances are you don’t know what it’s like to work off a two-metre platform with no guard rails, so until you’re confident in your abilities, use proper safety equipment!
When digging out the old stumps, make sure you have secure footing and that there are no power lines around that could be an electrocution hazard.
4) Keep calm and stay safe
Take extra care during this process – if any other people live at home with you then take turns working on each side of the house. If you’re working by yourself then ask a friend to keep an eye out for any oncoming traffic or you could work in shrubs and bushes that provide more cover.
5) Get it done right
If your old stumps are still good enough, they might be able to be reused. Your restumping company should know whether this is an option, so ask them whether your original posts can be used again before digging them up and throwing them away! Also, make sure you get all of the necessary permits and council approvals before beginning work. It’s best to play it safe than sorry when it comes to construction work involving your home.
6) Decide what to do with your old posts
If you decide not to reuse the original timber posts for any reason, then they’ll need to be disposed of properly. Don’t just throw them away or dump them on vacant land – it’s against the law. To dispose of them correctly, contact your local council about how best to recycle or dispose of the material.
If you’re looking for information about restumping, check out Restumping Melbourne website. They provide many different services for home renovations including restumping and even offer a 10-year workmanship guarantee! Visit their website today if you want to learn more.
Please note that this article was prepared without the involvement of professional, licensed restumping companies. Advice included in this article is meant as general advice only and should not be relied on.